HOHMTECH LIFE4 18650 3015MAH 22.1A

• Designed to feed power-hungry devices without having to swap batteries every other minute
• Mn and Mn inert replaced by an additional 2.5% Cobalt (Co) & Nickel (Ni) proprietary levels
• Exceeds all previous designs and chemistry results with greater amperage and capacity
• Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
• Updated Poly Seal: Enhances security of seal & proper operation
• NEW Mn bonding process that achieves greater purity: Cycle Life is increased to 75% nominal average of original capacity
• NEW NiCo Meld over 10kHz: process increases charging rate to 4.25A from previous 4A

Specifications:

• Model: Life
• Size: 18650
• Style: Flat Top
• Continuous Discharge Rating: 20.7A CDR / 36.3A Max Pulse as rated by Hohm Tech
• Nominal Voltage: 3.7V
• Maximum Voltage: 4.2V
• Max Charge Rate: 4.43A
• Max Charge Voltage: 4.2V
• Protected: No
• Rechargeable: Yes
• Dimensions: 18.23mm x 65.12mm
• Weight: 44.73g
• Max 80oC | 3.2V cut-off: 31.5A
• Pulse | Peak6: 37.1A
• Cycle Life Retention: 500 @ ?70%, 1000 @ ?60%
• Wattage output up 5% to 63W; Amperage up 6.8% to 22.1A CDR; Capacity up 7.4% @ >15A loads
• Chemistry enhanced by QSP (quad stripping process), which is proven to deliver greater voltage-sag resistance
• Quantity: 1

General information on battery safety: Do not overcharge or over-discharge batteries. Do not leave your batteries on the charger unattended. It is a good idea to check on the charger every 15-30 minutes. Do not charge batteries over 4.25 volts as it may reduce its lifespan. Charging over 4.5 volts can also cause the battery to burst. When purchasing a charger, ensure that it has safety features built in to prevent overcharging. Recharge batteries that have dropped below 3.6V and try not to over drain them. If the battery is drained below 3.6 volts it may never recharge fully. Do not short circuit your batteries. Shorting ANY battery can potentially burn it out or cause it to explode. Keep in mind that batteries have unique amp drain limits as indicated on the product pages. Building coils with low resistance may push the battery past its amp drain limit which can cause thermal overload. If you are building your own coils, a working knowledge of Ohm's Law is essential. Do not let your batteries touch metallic items. When carrying spare batteries, make sure to keep them in an insulated case. Loose change and other metallic items can create a path between the positive and negative contacts. Lastly, always ensure your batteries and battery wraps are in good working condition. For customers at our local vape shops, we provide free re-wrap services. Batteries with dents, or that are leaking fluid are not considered safe and should not be used.